Emsisoft Anti-Malware Free Download

Emsisoft anti-malware free download software setup in single direct link. Protect PC against malware virus threats. Secure PC from worms make it more fast.

Emsisoft Anti-Malware Overview

Emsisoft Anti-Malware is a sophisticated security tool designed to keep your computer safe from all nasty and malicious files, in whatever outfit like viruses, Trojan horses, spyware or adware.

The application depends on two powerful and dominant scanning engines and as a result blocks a huge amount of infections out there and make it certain that your computer is clean of malware and viruses.
If you need to examine your cookies, the application will recommend closing your Web browser. Custom not only lets you choose which folders to scan, but also lets you opt out of heuristic, tracking-cookie, and spyware-remnant scans.

The ‘Security Status’ tab checks whether File Guard Surf Protection options are working are not. It also gives you the possibility to start a new scan or update the virus definitions.

Emsisoft Anti-Malware needs a rational amount of computer resources, but a complete and through scan will critically give your system a trauma, so make it certain that all programs are closed before you start a scan.

On a conclusive note we can say that this is one of the best security tools on the market and we strongly recommend you to give it a try as soon as possible.

Features of Emsisoft Anti-Malwre:

Listed below are some of the features that you will experience after Emsisoft Anti-Malware Free Download.

• Three protection layers: Surf Protection, File Guard, and Behavior Blocker
• Relies on two scan engines
• Schedule scans
• Sophisticated security tool
• Automatic updates
• Set up restrictions for non-admin users

Emsisoft Anti-Malware System Requirements

Before you start Emsisoft Anti-Malware Free Download make sure your system meets the minimum system requirements.

• Operating System: Windows XP, Vista, 7 and 8
• Processor: Pentium I
• RAM: 256MB
• Hard Disk Space: 145MB space required

Technical Setup Details For Emsisoft Anti-Malware

• Software Name: Emsisoft Anti-Malware 8.1.0.33
• File name: EmsisoftAntiMalwareSetup.exe
• Setup Full Size: 214.20 MB
• Latest Version Release Added On: 14th Dec 2013
• Developers: EmsiSoft

Emsisoft Anti-Malware Free Download

Click on below button to Emsisoft Anti-Malware Free Download. This is complete offline installer and full standalone setup for Emsisoft Anti-Malware. This will work for both 32 Bit and 64 Bit operating systems.

Windows 7 Commands Every Administrator Should Know

PC troubleshooting is becoming less common in larger organizations, but consultants and techs in smaller shops still have to get their hands dirty identifying and fixing desktop problems. Oftentimes, troubleshooting Windows 7means delving into the command line. Here are 10 fundamental Windows 7commands you might find helpful.

1: System File Checker

Malicious software will often attempt to replace core system files with modified versions in an effort to take control of the system. TheSystem File Checker can be used to verify the integrity of the Windows system files. If any of the files are found to be missing or corrupt, they will be replaced. You can run the System File Checker by using this command:

sfc /scannow

2: File Signature Verification

One way to verify the integrity of a system is to make sure that all the system files are digitally signed. You can accomplish this with the File Signature Verification tool. This tool is launched from the command line but uses a GUI interface. It will tell you which system files are signed and which aren’t. As a rule, all the system files should be digitally signed, although some hardware vendors don’t sign driver files. The command used to launch the File Signature Verification tool is:

sigverif

3: Driverquery

Incorrect device drivers can lead to any number of system problems. If you want to see which drivers are installed on a Windows 7 system, you can do so by running the driverquery tool. This simple command-line tool provides information about each driver that is being used. The command is:

driverquery

If you need a bit more information, you can append the -v switch. Another option is to append the -si switch, which causes the tool to display signature information for the drivers. Here’s how they look:

driverquery -v

driverquery -si

4: Nslookup

The nslookup tool can help you to verify that DNS name resolution is working correctly. When you run nslookup against a host name, the tool will show you how the name was resolved, as well as which DNS server was used during the lookup. This tool can be extremely helpful when troubleshooting problems related to legacy DNS records that still exist but that are no longer correct.

To use this tool, just enter the nslookup command, followed by the name of the host you want to resolve. For example:

nslookup dc1.contoso.com

5: Ping

Ping is probably the simplest of all diagnostic commands. It’s used to verify basic TCP/IP connectivity to a network host. To use it, simply enter the command, followed by the name or IP address of the host you want to test. For example:

ping 192.168.1.1

Keep in mind that this command will work only if Internet Control Message Protocol (ICMP) traffic is allowed to pass between the two machines. If at any point a firewall is blocking ICMP traffic, the ping will fail.

6: Pathping

Ping does a good job of telling you whether two machines can communicate with one another over TCP/IP, but if a ping does fail, you won’t receive any information regarding the nature of the failure. This is where the pathping utility comes in.

Pathping is designed for environments in which one or more routers exist between hosts. It sends a series of packets to each router that’s in the path to the destination host in an effort to determine whether the router is performing slowly or dropping packets. At its simplest, the syntax for pathping is identical to that of the ping command (although there are some optional switches you can use). The command looks like this:

pathping 192.168.1.1

7: Ipconfig

The ipconfig command is used to view or modify a computer’s IP addresses. For example, if you wanted to view a Windows 7 system’s full IP configuration, you could use the following command:

ipconfig /all

Assuming that the system has acquired its IP address from a DHCP server, you can use the ipconfig command to release and then renew the IP address. Doing so involves using the following commands:

ipconfig /release

ipconfig /renew

Another handy thing you can do with ipconfig is flush the DNS resolver cache. This can be helpful when a system is resolving DNS addresses incorrectly. You can flush the DNS cache by using this command:

ipconfig /flushdns

8: Repair-bde

If a drive that is encrypted with BitLocker has problems, you can sometimes recover the data using a utility called repair-bde. To use this command, you will need a destination drive to which the recovered data can be written, as well as your BitLocker recovery key or recovery password. The basic syntax for this command is:

repair-bde -rk | rp 

You must specify the source drive, the destination drive, and either the rk (recovery key) or the rp (recovery password) switch, along with the path to the recovery key or the recovery password. Here are two examples of how to use this utility:

repair-bde c: d: -rk e:\recovery.bek

repair-bde c: d: -rp 111111-111111-111111-111111-111111-111111

9: Tasklist

The tasklist command is designed to provide information about the tasks that are running on aWindows 7 system. At its most basic, you can enter the following command:

tasklist

The tasklist command has numerous optional switches, but there are a couple I want to mention. One is the -m switch, which causes tasklist to display all the DLL modules associated with a task. The other is the -svc switch, which lists the services that support each task. Here’s how they look:

tasklist -m

tasklist -svc

10: Taskkill

The taskkill command terminates a task, either by name (which is referred to as the image name) or by process ID. The syntax for this command is simple. You must follow the taskkill command with -pid (process ID) or -im (image name) and the name or process ID of the task that you want to terminate. Here are two examples of how this command works:

taskkill -pid 4104

taskkill -im iexplore.exe